Best Beer Equipment Company For Beer Lovers!

Who does not love drinking beer? With warmer weather on the way, every one of us like sitting outdoors and enjoying beer. These are just some of the things we look forward to when we are in a relaxed mood chilling somewhere out with our family or friends.
Suppose, if you own a beer bar and you have a good number of customers daily visiting your bar, what can be more delightful than this! And If you have customers who consume beer on a high rate then you should have a Beer Equipment that allows the beer flow to run smoothly without any waste. Beer Fob is one such company which manufactures a piece of equipment called “DFC 9500” which saves your beer in each keg.
This product by Beer Fob is specially built to reduce beer wastage. The equipment keeps the beer lines always full of beer and removes the air filling in beer pipelines. As a result, it automatically reduces the amount of beer wastage and increases the benefit to your bar.

Benefits of DFC 9500:

• Helps in pouring beer without any interruption.
• Seamless Installation Into any Cooler Room Configuration.
• Easy To Clean.
• Helps to make more profit.
• Reduces the amount of CO2 or Beer Gas used because it no longer fills the supply line and escapes out of the tap.
• It requires less time to change kegs because the supply lines do not need to be cleared of gas and foam to get “clear” beer.

DFC 9500 comes with special features as it is easy to install and easy to use. It also provides high quality beer and reduces beer wastage.
Their unique processing technology allows the beer to run smoothly through the pipelines and provides consistency and flexibility for brewers. Contact us freely 1-888-225-2256 or buy online to purchase this product from the best Beer Equipment Company.

How Fob draft system reduces beer wastage and increases beer profits

Beer fob installed in long fob draft beer system will reduce beer wastage and increase beer profits in your bars. The purpose of this blog is to describe how a fob draft system works and to explain how using a beer fob can increase profits from draft beer sales when you install fob draft system dfc9500 on a long draw beer dispensing system. A fob draft system keeps the beer lines always full with beer and eliminates the air filling in beer pipelines. This will reduce the amount of beer wastage and increase the profit in bars.

Below we will discuss how much beer is wasted and there is one equipment that is beer fob dfc 9500 which saves and stops that wastage of beer. it is directly connected with a keg and prevents wastage of beer.

You can have a look at the chart below and know how much beer you have wasted in a month

In this chart, it is explained how much beer is wasted. Now, there is one equipment Beer Fob DFC 9500 which saves and stops that wastage of beer. It is directly connected with the keg and prevents wastage of beer.
The main equipment in our fob draft systems is the barrel, coupler, and fob.

Barrel: barrel is basically used to store beer and to transport it from one place to another that protects our beer from dust and air. it is also used for fast distribution of beer. The barrel is made of pure stainless steel and some are coated with the best quality of rubber aluminum or plastic. it usually has a valve which is attached to the coupler.

Coupler: the coupler is basically attached with the barrel that allows Co2 to enter the keg and helps to push the draught beer out.

Fob: fob generally means foam on the beer. In a fob draft system, the beer fob stops the beer flow immediately when the keg is going empty. This removes the foam that forms due to an empty keg.

Contact Us:  beer fob now to get the benefits of the fob draft system and save money, time and wastage of beer and earn more profit. You can call us at 1–888–225–2256 for further details.

DFC9500- Designed To Save Beer & leads your bar towards to profit!

What is DFC9500?

DFC 9500 is a device that detects and separates foam from beer. It is connected directly with a keg. If you use this, it automatically shuts down the beer supply when it detects an empty barrel. As a result, no foam is formed in the barrel, and you can save beer which is beneficial for your business.

Why We Use DFC9500?

If you open a new restaurant or bar and you are serving draught beer in your bar, then you have to provide the best beer and continue. Beer fob manufactures DFC 9500 which saves beer in each keg, and it keeps your beer supply lines full of beer.
When your keg goes empty, then the fob automatically stops pouring the beer. Due to this, the air is not passed in supply lines, thus saving your beer. Best beer pouring comes only with the best equipment. Beer Fob provides the best and affordable beer equipment- the DFC 9500 which saves and offers the best quality beer.

Features Of DFC9500

• Easy to install with a keg
• Easy to use
• It provides the high quality of pouring
• Specially manufactured to reduce beer wastage

How It Works

When your beer keg runs empty, your then beer is connected with air and makes foam. When you have a DFC9500 installed, and your barrel is full or when the beer is flowing, a float inside the Fob remains at the top. When the barrel goes empty, the drift instantly drops to the bottom like a suction. Then beer fob acts like a plug in a sink, creating a seal that prevents air entering the beer lines.

How To Install it?

When attaching a new keg, ensure to open up the bleed valve to drain out any excess foam into a bucket. Once fob is full and filled up with beer, you’re all set to pick up where you left off. No wasted beer or no useless mess, don’t forget to close the bleed valve!

Main Elements include:

• Barrel
• Connector
• Foam on beer detector (FOB)
• Tap

If you want to know more about DFC 9500 by Beer Fob, then you can visit our website or call us at 1-604-517-1223.

Beer Fob- Best Beer Equipment Company

You need a Kegerator, Beer Dispenser, Conversion Kit or other Beer Tap Equipment? You’re at the correct place! Beer Fob has all that you need to brew up and enjoy a super cold draft beer. Whether you require a Jockey Box, Keg Tap, Line Cleaning hardware or even Glassware and Steins, Beer Fob has it!

The best beer only comes with the best equipment. Beer Fob is the best beer equipment company that works with best manufacturers of the commercial draft beer equipment to bring you highest quality draft system imaginable

Beer Fob is the beer keg equipment company that also sells the products like DFC 9500. Here are the detailed instructions for DFC 9500 Installation:

• First, disconnect the keg head from the empty beer keg and connect to a full beer keg in the usual way.
• Press The Vent Button: Wait a few seconds for the foam to settle and vent again, so that the cavity is generally full of beer.
• Twist Up: Turn the knob counterclockwise until it stops! float will rise to the top of cavity.
• Lock Down: Turn the knob fully clockwise until it stops. That is it! You are now ready to donate beer.
• Cleaning: When flushing the lines, turn the knob anti-clockwise until it stops in the upward position. Operate vent button a few times while cleaning to ensure that the vent does not “snap” into an open position during regular use.

You can use the details mentioned above, or you can save yourself from the hassle simply by contacting Beer Fob who will not only provide you with the best DFC 9500 Beer FOB but will surely help you in installing and maintaining it well.

You can contact at 1-888-225-2256 US/Canada (toll-free).

Know About Benefits of Beer Draught Keg Storage System

Numerous individuals will regularly tell you that beer on tap is better than packaged or canned beer. Beer is the best on the day the barrel is filled at the brewery. As days go past, the freshness lessens. In general, the fresher your beer draught keg is, the better your tastes. Draught Beer is served from taps or (barrels) while bottle beers are being served from bottles. Light contrasted with draught beer effectively infiltrate bottle brews. Draught Beer is more delightful and agreeably sweet-smelling.

Benefits of Beer Draught Keg

• Quick set-up, as the gadget fits straightforwardly underneath the bar or back bar.
• The beer is drawn from the refrigerated cabinet straightforwardly underneath, leaving a minimal chance for the complexities that happen when dispensing over more extended separations.
• The chance to open more faucets and offer more brands.

Beer Draught Keg Storage Tips

There are three keys to properly storing beer draught keg: keeping upright temperature, proper pressure, and decreasing agitation inside the barrel. On the off chance that these elements are not appropriately represented, it can affect the quality and taste of the beer, decreasing your visitor’s experience and their probability to order again.

Keep the Keg at a Good Temperature 

The primary key is to find the right temperature for the beer. Most beer inside a draft brew barrel is pasteurized, which implies it’s important to keep it cool. High temperatures can cause excess froth, while low temperatures create a smooth taste because the flavor isn’t being released. To stay away from one of these situations, go for 38 degrees Fahrenheit. On the off chance that you go to a lower temperature, you won’t hurt the beer, yet any higher temperature may influence its quality.

Keeping up Correct Keg Pressure

The second key for storing beer is keeping the correct keg pressure. The pressure that is too low will make a couple of glasses full with froth, in turn destroying those glasses. Sadly, from that point onward, the beer will start to taste bad. The pressure that is too high will make the beer to leave the barrel too rapidly. This will have a reverse effect and you will get beer full of froth. Keeping the pressure around 10-12 PSI should work. In any case, each brand and every beer is somewhat different.

Want to know more about Beer Draught Keg? Call Beer Fob at 1-604-517-1223
1-888-225-2256 US/Canada and Get all information about Beer Draught Keg.