Best Beer Equipment Company For Beer Lovers!

Who does not love drinking beer? With warmer weather on the way, every one of us like sitting outdoors and enjoying beer. These are just some of the things we look forward to when we are in a relaxed mood chilling somewhere out with our family or friends.
Suppose, if you own a beer bar and you have a good number of customers daily visiting your bar, what can be more delightful than this! And If you have customers who consume beer on a high rate then you should have a Beer Equipment that allows the beer flow to run smoothly without any waste. Beer Fob is one such company which manufactures a piece of equipment called “DFC 9500” which saves your beer in each keg.
This product by Beer Fob is specially built to reduce beer wastage. The equipment keeps the beer lines always full of beer and removes the air filling in beer pipelines. As a result, it automatically reduces the amount of beer wastage and increases the benefit to your bar.

Benefits of DFC 9500:

• Helps in pouring beer without any interruption.
• Seamless Installation Into any Cooler Room Configuration.
• Easy To Clean.
• Helps to make more profit.
• Reduces the amount of CO2 or Beer Gas used because it no longer fills the supply line and escapes out of the tap.
• It requires less time to change kegs because the supply lines do not need to be cleared of gas and foam to get “clear” beer.

DFC 9500 comes with special features as it is easy to install and easy to use. It also provides high quality beer and reduces beer wastage.
Their unique processing technology allows the beer to run smoothly through the pipelines and provides consistency and flexibility for brewers. Contact us freely 1-888-225-2256 or buy online to purchase this product from the best Beer Equipment Company.

How Fob draft system reduces beer wastage and increases beer profits

Beer fob installed in long fob draft beer system will reduce beer wastage and increase beer profits in your bars. The purpose of this blog is to describe how a fob draft system works and to explain how using a beer fob can increase profits from draft beer sales when you install fob draft system dfc9500 on a long draw beer dispensing system. A fob draft system keeps the beer lines always full with beer and eliminates the air filling in beer pipelines. This will reduce the amount of beer wastage and increase the profit in bars.

Below we will discuss how much beer is wasted and there is one equipment that is beer fob dfc 9500 which saves and stops that wastage of beer. it is directly connected with a keg and prevents wastage of beer.

You can have a look at the chart below and know how much beer you have wasted in a month

In this chart, it is explained how much beer is wasted. Now, there is one equipment Beer Fob DFC 9500 which saves and stops that wastage of beer. It is directly connected with the keg and prevents wastage of beer.
The main equipment in our fob draft systems is the barrel, coupler, and fob.

Barrel: barrel is basically used to store beer and to transport it from one place to another that protects our beer from dust and air. it is also used for fast distribution of beer. The barrel is made of pure stainless steel and some are coated with the best quality of rubber aluminum or plastic. it usually has a valve which is attached to the coupler.

Coupler: the coupler is basically attached with the barrel that allows Co2 to enter the keg and helps to push the draught beer out.

Fob: fob generally means foam on the beer. In a fob draft system, the beer fob stops the beer flow immediately when the keg is going empty. This removes the foam that forms due to an empty keg.

Contact Us:  beer fob now to get the benefits of the fob draft system and save money, time and wastage of beer and earn more profit. You can call us at 1–888–225–2256 for further details.

DFC9500- Designed To Save Beer & leads your bar towards to profit!

What is DFC9500?

DFC 9500 is a device that detects and separates foam from beer. It is connected directly with a keg. If you use this, it automatically shuts down the beer supply when it detects an empty barrel. As a result, no foam is formed in the barrel, and you can save beer which is beneficial for your business.

Why We Use DFC9500?

If you open a new restaurant or bar and you are serving draught beer in your bar, then you have to provide the best beer and continue. Beer fob manufactures DFC 9500 which saves beer in each keg, and it keeps your beer supply lines full of beer.
When your keg goes empty, then the fob automatically stops pouring the beer. Due to this, the air is not passed in supply lines, thus saving your beer. Best beer pouring comes only with the best equipment. Beer Fob provides the best and affordable beer equipment- the DFC 9500 which saves and offers the best quality beer.

Features Of DFC9500

• Easy to install with a keg
• Easy to use
• It provides the high quality of pouring
• Specially manufactured to reduce beer wastage

How It Works

When your beer keg runs empty, your then beer is connected with air and makes foam. When you have a DFC9500 installed, and your barrel is full or when the beer is flowing, a float inside the Fob remains at the top. When the barrel goes empty, the drift instantly drops to the bottom like a suction. Then beer fob acts like a plug in a sink, creating a seal that prevents air entering the beer lines.

How To Install it?

When attaching a new keg, ensure to open up the bleed valve to drain out any excess foam into a bucket. Once fob is full and filled up with beer, you’re all set to pick up where you left off. No wasted beer or no useless mess, don’t forget to close the bleed valve!

Main Elements include:

• Barrel
• Connector
• Foam on beer detector (FOB)
• Tap

If you want to know more about DFC 9500 by Beer Fob, then you can visit our website or call us at 1-604-517-1223.

Get The Best Keg Fob With Us Today!

FOB generally means “Foam on Beer.” It is mainly designed to keep your beer lines filled and streaming with beer continuously, and the Keg is the Container. The FOB spontaneously shuts off the beer flow when it detects an empty keg. This expels the foam you get from an empty barrel and also the need to refill lines or remove air. When you replace another keg with the FOB installed on your beer line, your tap will consequently pour the beer with no chance of foaming when the barrel gets empty. If a FOB is not connected, once the keg gets empty your tap will start spraying and discharging foam. This results in wastage of foam beer, wastage of money and additional expenses for work and cleans up. Beer Fob provides the Best Keg Fob for you!

How Does the System Work?
Once the keg gets empty, only froth and foam is left behind. If we have Keg Fob installed in the system and this keg is full, the beer is flowing; then the foam remains at the top. Whenever the barrel gets empty, this foam drops down at the bottom of the keg like a suction. This suction acts like a plug which would prevent air or gas from entering the beer lines.
By using a fob detector, you can easily detect the foam on beer of wasted foam after changing a barrel. The FOB cuts the flow of beer at the tap which allows changing barrels with little or no waste.
At Beer Fob, You will get the best Keg Fob installed in our beer line system which pours continuous beer for you. For further details, you can call us today on our Toll-Free number at 1-888-225-2256.

Protect Your Fob Draft System Interests

Handling a bar is not an easy task. Not only for the hours but sometimes for customers It’s hard to control. Despite this, the owner of a bar must be a good businessman. It takes more than a love of beer and good times to make a successful bar. One of the basics of a profitable bar is draft brew. However, it is easy to let these benefits disappear from one spill at a time. Fortunately, there are ways to control the flow of brew and limit the amount you lose.

Wasting Beer Is Wasting Money
Moss is a delicate, though important, topic when it comes to brewing. You need an inch or two in your beer glass. The foam releases delicious savour and prevents the brew from overflowing on the way to the table. It also raises your profits because the foam only contains 25% beer. The problem is that when a barrel empties,it still has foam in it. If the line continues to pull from the drum, it will fill the beer lines with foam.

Using A Fob Draft System
One of the best ways is to use a Fob draft system. FOBs can be used in the draft system with pressure distribution systems of C02 and mixed gas, making them accessible to almost for all bar owners. The FOB draft system is a device that checks the brew when it leaves the barrel and enters the brew line. Once the barrel goes empty, fob detector cut the brew flow from the barrel. By this, the beer lines are kept free from the foam.

Refine your gains with Fob Draft System
The fob draft beer system will refine your benefits with foam detectors. Fob detectors will raise your profits by merely reducing the amount of brew lost in the foam. Each barrel has a specific profitability, but this quantity gets reduced with each spill and every drop of beer that wasted.

If you want to save money,time and less wastage of beer. Equipped with our Fob Draft System. To know more about fob draft system